Optical Terminal Closure OCT-16B Nap FDB0216B Pole Mount with Uncut
Cable
Network access point FDB0216B is an external use product for
installation in overhead networking (pole/wall/steel wire).
Features
Made of high strength plastic engineering material, anti-aging,
anti-UV and corrosion.
Mix splitting, splicing, distribution and fiber storage in one set,
convenient for ftth deploying
Small size, unique design, round shape, smooth and strong.
Total closed with brackets, ropes and pole mount metal sheet.
Wall mount, pole mount ,aerial mount available.
Best for outdoor harsh environment, waterproof IP65 grade.
There is position on box surface for logo or brand, silk print or
laser mark both ok.
The feeder cable can go in and through the box without cut, because
the cable entry port is mid span, and mechanical sealing.
Reasonable and enough space for fiber cable management system,
which ensure fiber radius <40mm.
Suitable for 16 pcs ftth (fiber to the home) drop cable
distribution.
Specification
| MODEL | FDB0216B |
| Dimension | 245*295*130mm |
| Material | PP+GF |
| Cable port | 1 oval + 16pcs drop cable or round cable |
| Cable diameter | Oval: 2 main cable (φ8-15mm) or 2 derivation cables (φ6-8mm) 16pcs: Drop Cable Low Friction 3x2mm or round 4.5-5.3mm |
| Fusion capacity | 16 cores single fiber |
| Max. Adapter | 16 SC +2SC |
| Max. Tray | 2splice tray (16cores) + 1 adapter tray (16SC) or 4 splice trays
(16cores). |
| Seal method | mechanical |
Standard accessory
Plastic bracket, metal wall/pole mount kits, heat shrink protection
sleeve, nylon tie, cable tie, label mark, buffer tube, etc.
How to open the box?
- Open the screw with a screwdriver.
- Open the bracket at right side, and loose the clip in front of the
cable ports, open the front strip according to the picture
direction.
- Take off the bracket from back, then can take off the lid by hand.
Care and safety
Be careful when handing cables and optical cords, especially in the
management of bare optical fibers.
During accommodation of the basic units within the product, check
the bending radius and nay other interference with other components
while opening and closing the product.
Optical connectors must be clean before each connection and every
re-connection.
Stay alert for laser radiation warnings, do not manipulate
connectors when lasers are on and do not turn the connectors
towards the eyes.
