16Cores MPO Elite PLC Splitter 8cores MPO+ 4pcs 1*2 Sca Coupler
Splitter Hybrid Splitter For Data Center Service room
Designed for data center applications requiring quick
infrastructure deployment such as main, horizontal, and zone.
MTP/MPO trunk multifiber cable assemblies facilitate rapid
deployment of high-density backbone cabling in data centers and
other high fiber environments, reducing network installation or
reconfiguration time and cost. They are used to interconnect
cassettes, panels or ruggedized MTP/MPO fanouts.
Our company also provides a variety of MPO customization solutions,
including MPO trunk patch cord, branch patch cord, MPO Optical
splitter, etc.
Fiber Optic splitter Features
• Low insertion loss and high return loss
• PDL automatic screening system(Ultra low PDL is available)
• High reliability and stability
• Connector can up to grade B
• 100% 3D tested by Daisi and Sumix
• High-low temperature cycle test
• 100% test before delivery
• FTTH Cabling solution could be design
1x9 Splitter Specification
| Split ratio (%) | 85/15 | 80/20 | 70/30 | 60/40 |
| Operating wavelength (nm) | 1260-1650 |
| Fiber type | G657A or customized |
| IL max(dB) | channel 1 | 1.6 | 1.8 | 2.1 | 2.7 |
| channel 2-9 | 21.0 | 18.6 | 16.5 | 15.1 |
| IL uni(dB) | Channel 2-9 | 1.8 | 1.8 | 1.8 | 1.8 |
| Return loss (dB) | ≥55 |
| Directivity (dB) | ≥55 |
| PDL (max.) | 0.3 | 0.3 | 0.3 | 0.3 |
| Uniformity (max.) | 0.8 | 0.8 | 0.8 | 0.8 |
| Wavelength dependent loss (dB) | ≤0.3 |
| TDL (max.) | 0.5 |
| Operating temperature | -40 ~+85 |
| Storage temperature | -40 ~+85 |
| Dimension (mm) / LXWXH | Bare fiber | 60x7x4 | 60x7x4 | 60x7x4 | 60x7x4 |
| 900um | 60x7x4 | 60x7x4 | 60x7x4 | 60x7x4 |
| ABS box | 120x80x18 | 120x80x18 | 120x80x18 | 120x80x18 |
Note:
1. Specified without connectors
2. Add an additional 0.2dB loss including connectors
Unbalanced optical splitter rate Detail information:
1x9 unbalanced splitter use the same steel tube 60*7*4mm as 1x8
splitter, input 1, output 9= 4*2+1pcs fiber array.
Fiber color is colorful, loose tube 900um can be customized, like
blue, orange, green ,brown, gray, white, red, black, etc, with
number marks to distinguish.
In order to distinguish the split ration, use different color like
blue to mark, this special chip 1x9 ensure unbalanced split ratio
not equal types, which can meet special requirements and flexible
optical application, and is widely used in 5G FTTR networks;
Output of the optical splitter can divide into 70/30 80/20 60/40 or
85/15% 4types;
All types of optical connectors can be used, like SC FC LC ST;
Polish method: UPC, APC；
Input ouput pigtails length: 0.5meter, 1meter, 1.5meter, etc
GPON Splitter Application
- Passive optical network (such as EPON, GPON, BPON, FTTX, FTTH,
etc.)
- Supports multiple users to share a single PON interface.
If buy 1:9 optical splitter blockless type only, will pack in
blister box with test report. The tube, connectors or cables will
be fixed in place in blister box with good protection.
Pre-terminated with connectors and assembly in optical nap box or
distribution box is acceptable at factory before delivery.
Frequently work with CTO fiber box
Fiber box CTO 10cores Fiber box CTO 12cores
